DETAILS:
SILENT TUNING BUFFER BOARD
Quality Moddable Buffer, Silent Tuning port & remove the tuner from your signal path
Although this circuit was primarily designed for on stage use Silent Tuning - it allows you to cut the signal to the amplifier while tuning your guitar. It removes the tuner completely from the signal path so there is no worry about whether your tuner is true bypass or not or whether your tuner sucks the tone out of your sound
It puts the tuner at the front of the signal chain where it belongs , the tuner sees a low (guitar) level signal free from the influences of any effects pedal when the tuner is connected further along the effects pedal chain
The circuit buffers (high input impedance, low output impedance) your guitar making it suitable to drive vintage (low impedance input) effects plus it increases performance when using long cables with your effects in bypass mode
The circuit provides an output of +6dB (gain of 2) although it can be configured as a unity gain (no boost) buffer or the gain can be increased by changing a single resistor. With a few modifications the circuit can be configured as a foot switchable booster and / or variable gain circuit
Download Build Report HERE
Check out the "How To" guide for Pedal Placement and how to use the Buffer HERE
IMPORTANT LINKS
For all product related enquiries about GuitarPCB products contact Pedal Parts Australia HERE
Full technical support for this and other GuitarPCB products is provided by the GUITARPCB FORUM HERE
SPECS:
45.7mm WIDE
37.3mm HIGH