PARAMIX

DETAILS:
PARAMIX PCB - Want this in a kit? Click HERE
 

Want this in a kit? Click HERE

THIS IS AN ADVANCED BUILD

Best Effects Loop - True Mixer with Phase Correction. Standard usage is to mix any percentage of effect with the dry signal

The phase switch ensures that both signals at the mix are in phase with each other
If the effect is a delay or echo, you can use the “Kill Switch” feature to cut off the signal to the delay or echo and still preserve the “tails”or “repeats”at the mix stage

It allows you to decide exactly how much wet and dry signal you want. No Ratios. This is a great way to Mix full-blown distortion with the gritty attack of your dry sound for added clarity. Or, just inject a little shimmer to your tone by adding in just the right amount of chorus or phase

A new feature of the ParaMix is the Insert jacks in the dry signal path. With nothing plugged into the IO (Insert Out) and II (Insert In) jacks, the dry signal passes directly to the mixing stage, IC1B. When an effects pedal is plugged into the IO and II jacks the dry signal passes through the effect before reaching the mixing stage

Use a delay and fuzz/distortion in the loop. This will thicken the sound. Set a small time delay (10mS to 30mS) and no repeats, and the effect will “sit behind” your clean signal

Bass Players can use this with any DIY or Commercial Pedal and not have to worry about Modding it for Bass! Mix in as much Dry Tone as needed for Bottom end and Rock out with the bass on any pedal you like

How about plugging your Ipod into the return jack and mixing your Jam Tracks with your Guitar for the perfect practicing tool

The correct type of jack must be used, these are mono jacks with a contact switch. See our Switchcraft 12A HERE
 
Download Build Report HERE

IMPORTANT LINKS

For all product related enquiries about GuitarPCB products contact Pedal Parts Australia HERE
Full technical support for this and other GuitarPCB products is provided by the GUITARPCB FORUM HERE

SPECS:
53.4mm WIDE
44.5mm HIGH