SQUAREPLUG SPS4 MONO PLUG

DETAILS:

SQUAREPLUG SPS4 MONO PLUG

SPS is the shortest soldered 1/4" connector with strain relief made to date. It protrudes by only 21mm when plugged in and has an OD of 13mm [just under 14mm around the screw heads area]

SPS fits on any controller/patch bay/switching system/interface and features a unique 2-screw cable holding mechanism that doubles as a discreet yet effective cable identification system.

Effective Strain Relief
The cable is firmly held in place by two lateral screws preventing any tension on the solder joints. It is a very effective way to prevent the cable from moving in any direction.
There's absolutely no risk of damaging the cable by using this system. Tests have been carried out on a number of cables with soft to more harder outer jackets with excellent results.
You can safely hold the cable and pull it from whatever socket it's plugged in with zero risk of harming the cable or the solder joints.

Shape and Finish
The handle of the SPS has been carefully designed to be functional and elegant at the same time
A circular groove allows to hold the plug to patch it or un-patch it effortlessly despite its compactness. Additional grip can also be obtained by holding the plug right where the screw heads and the groove intersect
A matte Ni finish gives the SPS a professional look and feel

The SPS4 is compatible with any cable that’s 4.8mm or less in diameter
See our MOGAMI 2333 4mm CABLE HERE

SPECS:
21mm Length
13mm Outside Diameter
5mm Cable Opening. Allows cables up to 4.8mm OD
All Metal Construction